Weights and Measures Metrology Fees
For each mass standard tested or certified to meet ASTM Standard E617 tolerances of Class 5, 6, or 7, the fee is:
- <10 lbs. or equal to 10 lbs. or metric equivalent $1.95 per unit
- >10-50 lbs. or metric equivalent $5.70 per unit
- >50-1000 lbs. or metric equivalent $8.40 per unit
- >1000 lbs. or metric equivalent $25.00 per unit
For each mass standard that is tested or certified to meet ANSI/ ASTM Standard E617 Appendix X5. for Class 4 or equivalent tolerances, the fee is:
- 0-10 lbs. or metric equivalent, without adjustment $5.00 per unit
- 0-10 lbs. or metric equivalent, with adjustment $9.30 per unit
- >10lbs. or metric equivalent $28.20 per unit
For each mass standard tested or certified to meet ANSI/ ASTM Standard E617 Appendix X3. for Class 1 or calibrated to determine conventional mass values, the fee is:
- 0-10 lbs. or metric equivalent $28.20 per unit
- >10-20 lbs. or metric equivalent $40.00 per unit
- >20 lbs. or metric equivalent $50.00 per unit
For each Dead Weight to determine conventional mass values, the fee is:
- <10 lbs. or metric equivalent $6.00 per unit
- 10-50 lbs. or metric equivalent $10.00 per unit
For each volumetric flask, graduate, test measure, or prover the fee will be as follows:
- 0-5 gallon capacity or metric equivalent $25.00 per unit
- >5-50 gallon capacity or metric equivalent $35.00 per unit
- >50-200 gallon capacity or metric equivalent $56.70 per unit
- >200-500 gallon capacity or metric equivalent $141.60 per unit
- >500-1000 gallon capacity or metric equivalent $169.80 per unit
- >1000 Gallon capacity or metric equivalent $228.00 per unit
- 0-25 gallon capacity or metric equivalent used for measuring Liquid Propane Gas or similar gases $112.80 per unit
- >25 gallon capacity or metric equivalent used for measuring Liquid Propane Gas or similar gases $169.80 per unit
For each linear measure that is calibrated to determine actual values, the fee shall be as follows:
- Rigid Rules (at no more than 6 calibration points) $100.00
- Steel Tapes (at no more than 12 calibration points) $100.00
Miscellaneous Fees:*
- For each linear measure that is tolerance tested or certified to meet a certain tolerance $75.00
- For each liquid-in-glass or electronic thermometer that is tolerance tested or certified $50.00
- For each liquid-in-glass or electronic thermometer that is calibrated at no more than six (6) calibration points to determine actual values, the fee shall be $100.00
- For each special test or special preparation $50.00 per hour
- All calibration tests $25.00 minimum
NOTE* - Additional Fees May Apply depending on test methods and number of calibration points. Visit Section 5F-1.040 for specific fees.